Recent content by ClydeG

Yes Sir 195's

30 Nosler 84.86 Gr of 4831sc Federal 215 LRM ADG Brass Neck Tension .0025 SD 7.6 ES 16 Avg 3133 FPS .5 MOA at .020 of lands Seating ladder upcoming. 24" Proof Carbon barrel 1:9 twist.

Loading 175gr SB-2 in 300wm Bergara B14 1:10 twist 24" Barrel. I have: H4350,H1000, Retumbo, Varget, 4831SC Does anyone have any experience with similar combo? A Little background, trying to find a load for a friend and he wanted Barnes TTSX or Berger(sorry NRAlifer), had good not great SD'S...

Thank you, I have that information; I was hoping someone would have real world experience with the BD2's. I also understand that all rifles are different just looking experience with similar barrel/action.

Any suggestions on .30 nosler? 195gr BD2 Alamo precision rifle w/ 24" proof research carbon 1:9 twist looking at H1000, 4831SC, Retumbo

No unfortunately i do not i will post some of seating ladder. I was going to start at .017 off and work down to .032 off in increments of .03. Suggestions?

2-5 shot groups in middle of nodes found in previous ladder, 49.04 Gr Leverevolution 1-3082 2-3095 3-Did not register 4-3099 5-3111 SD 11.9 50.10 Leverrevolution 1-3137 2-3149 3-3156 4-3145 5-3124 SD12.2 Did everything i could do to keep consistent, shot "warm up" shots, keep barrel between...

Take 750.00 shipped?

Is this a 1st or 2nd Focal plane?

Short action. i will look back at my notes on COAL and CBTO, it was .02 off of jam but i will get back to you.

They were all pretty tight that "walked" vertically, I had Magneto Speed mounted on barrel, I had forgotten my attachment to mount to rail, this may have affected harmonics some. I do feel like the first 5 were tighter, I will update. But yes I'm pretty excited about speed.

.308 1:10 20"proof research barrel, Remington action trued, Pacific tool and die bolt, Magpul Hunter stock and Vortex viper PST 150 Grain BD2 .02 off jam, 1X fired Lapua brass neck turned to .013, .020 neck tension, CSI LR primer Hodgdon Leverevolution. Ladder 48.3-3066 48.6-Brain fart...

any more info? Going to start load development asap but RL26 hard to find around here.

I'm sorry what sizing increments?

What increments do i need to do it in? Ordering from above sight now.