BillR's latest activity

You might be on to something. Extraction has never been tough. I just pulled pieces of 1x fired Peterson out of the tumbler. There is a...

Well I am going to go with bad batch of brass. My measuring is meticulous. I think I had 1 piece separate like this on the very first...

if you're setting up the die on brass that is not fully expanded you're sizing to much . you need to fire the brass and neck size...

Looks like you may be bumping the shoulder back too far if thats happening after only 5 loadings.

Please only 850? Thats usually my warm up distance with my 22 lr. I tell people i never miss when i shoot. I always hit...

The only ones that have manufactured scopes for Cabelas or a company in Japan that builds to order and also does a lot of other...

Rumor has it that their "Euro" scopes are Meopta. Does anybody have one?

I only have Full Length dies for all of my cartridges. I have Wilson case gauges and I run all my resized brass through them. Never have...

Just did 500 once fired mil lc brass. Rcbs fl die and imperial sizing wax. I run it through sizer rotate 180deg and run it again. No...

It’s funny how we disagree about small base dies.. I suggest that you at least try your regular full-length die and see if it chambers...

Thanks to Dogface 368 and Wrenches. I have begun to use a SB die for our son's Browning .270 BAR. Hitherto, I've just used standard...

I deprime my GI 7.62 brass with a Redding decapping die. Next I tumble it with liquid and stainless steel pins to remove range grim. I...

Don’t waste your money on a small base die unless you’re into AR stuff. Small base dies will just result in looser fit in your chamber...

Like others above have said, I have thousands of rounds of 7.62 X 51 brass from many different manufactures both foreign and domestic. I...

When I get a hold of LC 308 brass I do the following. Tumble the hell out of it. It's dirtier inside, than you think. Anneal it prior to...