Recent content by Bill_Wallace

Problem solved. Discovered that brass was not sized properly. Resized brass and now all case cycles effortlessly.

OK thanks.

Will start with a LE Wilson case gauge and see what I can find. Most, if not all, of that brass has been fired through the BAR

Yes, I'll have to buy one. I will try a LE Wilson case gauge and see what I find.

I have a B-14 Hunter in 308 Winchester that is very very accurate with Lapua 167g OTM Scenar ammo and feeds perfectly. It printed a 1 inch group at 200 yards with this ammo with a Burris 2x7 Fullfield E1 hunting scope I scalped from my 1980 Browning BAR (which I bought new), also chambered in...

I hope it's ok if I resurrect an old thread, but I have a similar, if not the same problem as birdiemc. I have a B-14 Hunter in 308 Winchester that is very very accurate with Lapua 167g OTM Scenar ammo and feeds perfectly. It printed a 1 inch group at 200 yards with this ammo with a Burris 2x7...