Recent content by BigMeech556

Me personally I say find what neck tension or "interference" you want and get an expanded mandrel in that size then go .001 less with your bushing so you are setting your final with the expander mandrel. Also why I love the sac modular die because it has it in the die so it's 1 pull to do it all

Me personally I say find what neck tension or "interference" you want and get an expanded mandrel in that size then go .001 less with your bushing so you are setting your final with the expander mandrel. Also why I love the sac modular die because it has it in the die so it's 1 pull to do it all

If you were able to get the Berger 85.5 at 3900 at 60 degree weather at 1000 yards its only 13 MOA drop lol. With 925 ft lbs also at 1000 with a 22 cal lol.. probably burn out the barrel at 800 rounds too though

Hey gerry what do you use for load data? I am doing my next chamber in 223ai do you just go like 10 percent higher than 223 rem loads?

Any updated data here? I have been testing these lately shot a .20 inch 5 shot group with 21 grains of 8208. Velocity is low at like 2550 but man that thing printed nice my cbto was 1.960 which was .010 off the lands I've also tried n140 and sw precision. Next is h4895 but I only have 90 bullets...