Recent content by Aled24

What HMR have you got? I did have a Savage BTVS laminated but I sometimes had very good groups then the next day out of the cabinet it would be 2ins out so sold it.

What nobody has mentioned is the fact that the barrel itself is getting hot just sitting in the sun without a single shot fired, the thinner your barrel the quicker it gets hot especially a blued barrel. I would make a summer and winter load or choose a more stable powder, Also if you have...

I’m no expert bur from reading several post on many forums I did brake in my barrels and used these shot to get it on paper and close to zero, Did it make any difference who knows but I feel like I have done the right thing as it shoots .5 and sometimes less from a factory gun.

A friend of mine has the 3 mentioned binos. 1st for my eyes Swaro 2nd Leica 3rd Zeiss I have recently Bought the SIG 3000 Which I’m very pleased with granted the glass is not as good as the Swaro but not much in it exept the $1500 price diference.. My eyes are 50+ Have a look through as...

So jealous, a hunt to remember 👍

Someone mentioned in a earlier post the importance of torquing the action screws to the correct ftlb’s, I can second this, I upgraded the standard stock to a GRS and my grouping went from .5 to 1MOA 😱 The problem was that I had torqued them to the standard stock speck. On the GRS I had to torque...

You are absolutely right it does not make any difference if you are dialing for elevation if its FFP OR SFP but where it makes a difference if you were to use the aiming points on a SFP at different magnification your point of impact will be different on every magnification, but on a FFP scope...

This is what I have started doing, 6 frozen Milk jugs last for 4 days no need to drain the cool box. Just don’t fill to the Milk jugs to the top when you put them in the freezer.

S&B Polar -96% light transmission plus illuminated + BDC locking turrets. £1,695 from Optics Warehouse 😉

Hi I will put the sonic cleaner on for 6 min 3 times giving the basket a good shake inbetween cycles.

Hi I shoot foxes in Wales but it's the same principle, first of all dont start calling imediatelly when you arive at your calling spot,start with something quiet like a little mouse call just for no more than 20 sec, then no calling for around 3-5 min to give the coyoties a chance to come in...

Hi I have never had this problem but I try to limit the amount of solvent coming back into the chamber by using a bore guide that I have attached a cut down a empty fire formed case, granted you can only use it for that gun but it does save overspill into the chamber.

Hi, just wondering if someone has fitted a rear monopod on a GRS Berserk stock?

Hi what powder/loads/heads are you using?

Hi, clean the barrel, get yourself a tympanic thermometer measure the cold bore temp, fire one shot, clean the barrel, let the barrel cool down to the original cold bore temp and so on, Torquing the action screw is definitely worth a try, have you tried it without a mod? I had a good friend...