Recent content by 6.5/06

boyd what primers do you use WLR or WLRM .some guys say they use 210m's. PS ask jody were those pictures are .What are ya hiding that thing uder lock and key or what!

Maelty you can buy a new 700sa from brownells.But it 400.00,truing action about 100.00,opening up bolt face and installing sako about 100.00.This is ok if you were building a match gun,but you would probably be better off just buying a new hunting rifle and using extra money to put a brake on...

Maelty you can buy a new 700sa from brownells.But it 400.00,truing action about 100.00,opening up bolt face and installing sako about 100.00.This is ok if you were building a match gun,but you would probably be better off just buying a new hunting rifle and using extra money to put a brake on...

come on now ,mabe I'l have too wait ,but the doom thing may be the other way around.Remember me match 4 ,1/2 a bullet hole is a 1/2 a bullet .I may have just got lucky .I'l have to find that cow pasture again to walk through right before the first match.

come on boyd shooting seasons getin close let the cat out of the bag, you have torcherd us long enough. jody were are those pictures.

Boyd what case is it based on ,and what action ,barrel and stock did you use. Jody fire up that camra with that telliscope on the end and go hang out by boyds house .I'm too far away too do any recon from here!!!SEND PICTURES FAST!!

sakostw I have a rem 700 with a factory brake.For the brass I uniform the primer pockets and debur the flash holes.I also weight check the cases.I use remington brass ,winchester mite be better. I havent fitteled with it much ,its a 24in barreled hunting rifle.THe loads I gave shot real good so...

boyd cut the bull and spill the beans .What do you got and hows it shooting !It better be good ! I'm getting a new pee shooter and I'll be ready the first weekend in may! If you havent gest I can't wait to get back to the range.

sako 7stw I have stw also. I use 140gr noslor bt's and 162gr amax's. 140s with 76.0gr of rl22 and cci250 primer.162s with 72.0gr of rl22 and cci250. both bullets are moly coated and not touching lands .start out lower than this and work up.162's shoot .1 at 100 140 shoot .25. good luck,I love...

jon12 7dakta brass is hard to find also.7wsm brass is cheaper and you still have the advantage of being short and fat . Speeds are about the same too.

I use 140gr jlk's in 6.5 they work good at 1000yrds. they also make 190's and 210's for 30cal ,boyd uses 210's in his 300wsm. they mite also make 168's that would be a good with a 30/06.