Recent content by 300remum

yes! only about 8h drive :)

thank you very much Jon! i'm from Sherbrooke, Quebec. thank's for the tips on shooting techniques. for load development i shoot from the bench with sand bags in the front and the back. i will try to find a rabbit ear bag for the back if you think it might help. i'm left hand shooter. when...

you mean that i'm right and that i should leave it there and practice? english is not my first language so, not sure what you meant. so far i had always improved my loads by playing with aol after finding a charge. a couple of time i went from 1.5" group to .6-.7" if i then played with...

thank's everyone for the help last week i tested this load a bit further. here is the three 5 shot groups i got using 25 gr and a coal of 2.300 as in the ocw test. the first pic that have 2 holes on the left and 3 on the right was the last group i shot. a young gentlemen shooting next...

thank you guys. i will load 25 gr. and try different COL. since 2.300" is my max mag lenght, i will try 5 shot groups of 2.300-2.990"-2.980"-2.970"-2.960" and 2.950" sounds good?

Hi! i bought a second hand savage 12 FLVSS in 223 rem. i received my reloading stuff this week and prepared 21 cartridge from 23.5 to 25.3 gr. in .3 increment. they were shot in a round robin fashion as asked by the method. the result are oustanding for me. i never had such good result...

i have found that by blocking the right side objective with my left hand while operating the button with my right hand make it possible to use it in bright day light.

Thank's for the link Dr Vette I would like to keep the hinged floor plate on my rifle, so they won't fit. But I found a factory take-off hs precision stock From a right hand rifle. I'm thinking of buying it, fill the right side bolt slot with Devcon, dremel one on the left and do a paint job...

Thank you The savage has the plastic stock.and the tang is floated

hi all! last winter i bedded my savage 16flhss to try and improve accuracy i only glass bedded the action and stopped at the barrel nut. i tought i'd try it like that first and if it didn't work, i'd bed the first 4 " of the barrel just in front of the barrel nut also. well...i'm there. want to...

i'm really interested in buying a pair of these. but can you use it in bow mode at long range, in order to get true horizontal distance instead of bullet drop? say at 500-700 yard?

hello all! i started load development for my wife 260 rem model 7 this morning. i use remington once fired brass cci br 2 primers nosler 120 gr. ballistic tips and h4350 powder coal is 2.780" i tried the newberry method for the first time. as far as grouping goes i'm satified, for a first...

i shot 2 deers and 1 coyote so far with the 168 g barnes ttsx. both deers were shot in the ribs with impact velocity being 2700 fps approx. inside the rib cage we could see 1"-1.5" entrance holes, (exits were the same) showing that the bullet opened completely in the skin. the small coyote ( a...

still debating between the 270 win. and the 7mm-08:D

i load the 200 accubond in my RUM and the 168gr TTSX are exremely accurate in 3 rifles we tested them in. groups are in the ,25 to .5" with factory guns. that should be an excellent bullet to hunt moose and deer at close range. (up to 400 yards).