savage model 93r17

mchandyman

Member
Joined
Feb 27, 2014
Messages
8
Location
northern cal.
i just purchased this rifle. took it to the range to zero it in. i noticed that the bolt catches on the magazine when cycling the round in the chamber. is this normal if not what would the solution be to fix this.
 
The clip is held by a bracket along its rear edge. It's the one you slide the clip onto when you install it.

That bracket and its angle is VERY susceptible to the torque of the screw that holds it in place. If the torque is nor perfect then the clip will not line up, and you will have your exact problem.

It may take several attempts at tweaking that screw to fix the problem. I've had to do it twice on my Dad's rifle, and it can be frustrating.
 
Warning! This thread is more than 11 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Recent Posts

Top