redding presses

reed

Well-Known Member
Joined
Dec 8, 2007
Messages
89
Location
PA
Will the redding boss press fit the 300RUM and 300 wby mag or does just the redding ultramag press fit those cal.


Travis
 
The Redding Boss is a small-frame press having approximately a 4" frame opening and 3 1/2" ram stroke.

The Big Boss has a 4 1/2" frame opening and 3 13/16" ram stroke.

The Ultramag has a 4 3/4" frame opening and 4 1/8" ram stroke.

The T-7 Turret press has a 4 3/4" frame opening and 3 13/16" ram stroke.

The Big Boss is designed to handle the large magnum calibers. This is an excellent general-purpose press, and, if you choose it for your own, I believe you will be well pleased with its service. The T-7 Turret has similar capacity with the added convenience of keeping your dies permanently mounted. Similarly, the Hornady L-N-L bushings can be used with the Big Boss and Ultramag.
 
Last edited:
Warning! This thread is more than 17 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top