Bang4theBuck
Well-Known Member
I found 2 nodes that I like, and I am considering looking at another and have limited components readily available and wondered if someone could help out some quickload data to tell me if I am at max pressure. Here are the two loads.
26" 300 WM match chamber
Silencerco Hybrid Suppressor
ADG brass
89.6 grains of water capacity
215 berger hybrid
Trimmed case length 2.612"
COAL loaded cartridge 3.697"
.005" off of the lands
Magneto speed velocity 2954-2961 fps
The second load is the same except the charge and velocity as follows:
77.1 grains @ 3041 fps.
Also wondering what the pressure is going to do if/when I introduce .010 to .030" more jump.
Thanks in advance for the help.
26" 300 WM match chamber
Silencerco Hybrid Suppressor
ADG brass
89.6 grains of water capacity
215 berger hybrid
Trimmed case length 2.612"
COAL loaded cartridge 3.697"
.005" off of the lands
Magneto speed velocity 2954-2961 fps
The second load is the same except the charge and velocity as follows:
77.1 grains @ 3041 fps.
Also wondering what the pressure is going to do if/when I introduce .010 to .030" more jump.
Thanks in advance for the help.