Need help, please review

[Bang4theBuck]

I bought a nice carbon stock from a fine member of this forum, expecting the inlet to be BDL, and it appears to be something else. I want to have a BDL style bottom metal, but wondering if someone can tell by the picture below what inlet this actually is. The bottom metal.currwntly installed is BDL. Please advise if you know what it might be, and where I can get what I need in short order. Thanks.

 

[7stwnut]

Maybe a Hawkins M5 inlet?

 

[Bob Wright]

Did you contact seller to see? Or, contact the mfr and see. The manufacturer would know what fills the inlet.

 

[woodnut]

IF, and a big IF, the barreled action and the bottom metal fit, and if you are kinda stuck, I'd accraglass it in and color it to sorta match and go shooting. Bummer that it isn't what you expected.

 

[lancetkenyon]

Could be an Oberndorf BDL. Mine are a bit bigger than standard R700 BDLs.
Or a Badger M4 BDL.
Not all BDL are created equal.
I would hit up the seller to see what he was running.

 

[Bang4theBuck]

If it is an oberndorf bdl or if it is an M4 BDL, where would you recommend that I find one?

 

[jpfrog]

If it is an oberndorf bdl or if it is an M4 BDL, where would you recommend that I find one?

Looks like M5 to me. You can get M5 in DBM to take AI pattern magazines just about anywhere online. I really like Hawkins. You can also get a hinged floor plate (Oberndorf) for an M5. I would confirm with the seller what the stock was inlet for before ordering your bottom metal though.

 

[lancetkenyon]

If it is an oberndorf bdl or if it is an M4 BDL, where would you recommend that I find one?

M4 from Badger Ordinance.
If it is an Oberndorf, look at Hawkins, PTG, etc.

 

[ShtrRdy]

Is the BDL magazine box cutout pretty close to the BDL magazine box you have?