Mauser LR Rifle 7mmRem Mag

Discussion in 'Long Range Hunting & Shooting' started by fmsniper, Sep 15, 2009.

  1. fmsniper

    fmsniper Well-Known Member

    Messages:
    733
    Joined:
    Jul 16, 2002
    After 6 weeks my Pac-nor super match 26 inch 7mm Rem Mag barrel, 11 degree crown.
    Arrived, I mounted it on a Commercial FN Mauser action.
    Work done
    Lugs lapped
    Receiver trued, stock glass bed devcon steel bed
    Stock =Richards micro fit Tac Driver
    10 MOA Scope Base, Burris XTR rings
    Scope 4x14x50 Falcon Menace Mildot
    P&H Side Safety trigger

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     

  2. fmsniper

    fmsniper Well-Known Member

    Messages:
    733
    Joined:
    Jul 16, 2002
    got back from the range
    Ammo is factory 7mm RM
    Remington 175 Core-lock PSP

    .4 inch@100

    this brake in shots so i expect it to get better with better ammo and over time

    [​IMG]
     

  3. kiwi3006

    kiwi3006 Well-Known Member

    Messages:
    674
    Joined:
    Aug 1, 2007
    That's good accuracy for factory ammo! Should be areal hummer with handloads tuned to the rifle.

    Stu.
     
  4. fmsniper

    fmsniper Well-Known Member

    Messages:
    733
    Joined:
    Jul 16, 2002
    I was thinking the same thing
     
  5. bvmoney

    bvmoney Active Member

    Messages:
    27
    Joined:
    Sep 15, 2009
    that sir is 1 beautiful gun!
     
  6. fmsniper

    fmsniper Well-Known Member

    Messages:
    733
    Joined:
    Jul 16, 2002
    Thank you
     
  7. HUAINAMACHERO

    HUAINAMACHERO Well-Known Member

    Messages:
    1,080
    Joined:
    Oct 16, 2008
    Congratulations, that is a DANDY looking rifle!!!
    And promise to be a great shooter.
    Enjoy itgun)gun)gun)
     
  8. liltank

    liltank Well-Known Member

    Messages:
    4,158
    Joined:
    Nov 3, 2008
    Very nice. Did you opt for the pillar bedding, or did you get it bedded? I may have missed that in your description.

    Tank
     
  9. MontanaRifleman

    MontanaRifleman Well-Known Member

    Messages:
    6,068
    Joined:
    May 21, 2008
    Can't say it much better than that...
     
  10. fmsniper

    fmsniper Well-Known Member

    Messages:
    733
    Joined:
    Jul 16, 2002
    I did the work my self, I used Devcon steel bedding
     
  11. GNERGY

    GNERGY Guest

    Really nice work.
    Where did you get the scope base? I have a Mark X Mauser in .25-06 that I am trying to find a scope base like that for.
    Thanks
    Tarey
     
  12. fmsniper

    fmsniper Well-Known Member

    Messages:
    733
    Joined:
    Jul 16, 2002
  13. liltank

    liltank Well-Known Member

    Messages:
    4,158
    Joined:
    Nov 3, 2008
  14. GNERGY

    GNERGY Guest

    Great, Thanks Guys

    Tarey