looking for a long range 6mm ackley load

mtnman375

Member
Joined
Jan 24, 2013
Messages
15
its a 26in 1in 10 twist bbl my top 3 picks i want to try first is 87 or 95 gr vld 65or 70gr vmax then b tips im hopein for a 1000yd goher and or steel plate load i had it out to 700 yds on steel with 100gr sp and out to 347 on deer with a 80gr ttsx
 
Berger only makes 3 VLD bullets for the 1/10 twist 6mm barrels and they vary from target,varmit and hunting. All Bullets | Berger Bullets

I build 6RemAI years ago and used 95gr Nosler partition for antelope 46gr/IMR-4350 @ 3393fps was nothing LR under 500yd shots and it was on LA also had 1/10 twist barrel.

This is one of my on going project picture of 243AI going to be my walk around antelope rifle

http://mail.aol.com/37288-111/aol-6...ent.aspx?uid=29047424&folder=OldMail&partId=4

I've been running 87gr Hornady in the mid 3400fps got a 1/10 twist barrel haven't got it pass 300yds yet and I have few more bullets to try. If it was me I'd pick highest BC and see what that does then run ballistic tables out to 1k see if it's something you like.

Well good luck
 
thanks for the info the 87gr vld hunting bullet will still have over 1400 fps at 1000yds if i get it doing 3300fps or better with 23 to 25 moa drop at a 1000yds and for a hunting load i run the 80gr barnes ttsx at alittle over 3500fps and that thing rocks for deer and antelope this was my first year with it and i got 8 deer 1 antelope with it and im in love
 
I run a stout load of H4831sc in my 6mmai with 87gr Vmax with MV of ~3250 fps. That leaves me with just under 1300 fps @ 1000 yards with 25.75 MOA drop zeroed at 200 yds! Mine is a 28" 1-8 twist, could probably up the charge by another grain to gain some velocity. Have to do some more testing once all this snow melts up here in Manitoba...

I've only stretched this load out to 800 yds, but it's super accurate with a few groups around 3/4 MOA!

Good luck on your search and good gun)
 
Warning! This thread is more than 12 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Recent Posts

Top