Leupold mil-dot power question

Dave King

Well-Known Member
Joined
May 3, 2001
Messages
2,366
There should be a "calibration" mark on the power ring or a note in the literature for the scope. When both scopes are set to the "cal" mark they should both indicate the same value(s).
 
It depends,

Is the reticle in the first or second focal plane. My new 6.5-20 leuy tactical has the reticle in the first focal plane. My 2nd gen mil-dot reticle is accurate all power levels. If your reticle is in the second focal plane, then you'll need to use the calibration setting on the zoom ring.

Hope it helps
smile.gif
 
If I hold a 4.5-14 mil-dot and a 6.5-20 mil-dot on the same target at the same yardage will the dots be in the same place on the target or are the dots in the 6.5-20 only half the distance. Thanks
 
Warning! This thread is more than 21 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Recent Posts

Top