"inexpensive" 2000 yd target rifle

[ar10ar15man]

savage 111 action, boyds stock, ivey 150 moa rings, egw base, in stock krieger 1/9 27" heavy mtu
profile, timney trigger, blew the budget on a new nf 12-42 when i found the ivey rings. borrowing the suppressor from another rifle. 17.9 lbs in an 18 lb class . 230 bergers with either rl26 or n570. plenty of velocity for super sonic past 2k. getting ready to send the bbl out for a coating.

 

[longrangebo]

savage 111 action, boyds stock, ivey 150 moa rings, egw base, in stock krieger 1/9 27" heavy mtu
profile, timney trigger, blew the budget on a new nf 12-42 when i found the ivey rings. borrowing the suppressor from another rifle. 17.9 lbs in an 18 lb class . 230 bergers with either rl26 or n570. plenty of velocity for super sonic past 2k. getting ready to send the bbl out for a coating.

 

[longrangebo]

I dont think so!

 

[Bravo 4]

300 win or RUM?

 

[ar10ar15man]

300 win mag. COAL is 3.82 with the 230 berger.
my current rifle, a 26.5 lilja does 2913 with rl26 and the 230 berger

300 win or RUM?

 

[ar10ar15man]

maybe you should not think so much.
300 win mag custom match reamer, throated to 3.82 for the 230 berger.

I dont think so!

 

[cbobclark]

My .50BMG bolt single shot!

 

[Bravo 4]

My .50BMG bolt single shot!

Inexpensive? Never heard the .50 being synonymous with that word.

 

[ar10ar15man]

read my signature lines
target with a x and rings 10/9/8/7/6
bring it out
june 20/21/22 townsend mt.

My .50BMG bolt single shot!

 

[Litehiker]

300 PRC. Look at some Youtube explanations of this cartridge.

The US Army chose it for their new Barrett MRAD sniper rifle for good reasons. And they worked with Hornady during its development.

Eric B.

 

[ar10ar15man]

the rifle is built!

when a premium builder makes some brass i will consider it, and more than one quality brass source. we all see how hard it is today to find top level simple 300 win mag brass.

300 PRC. Look at some Youtube explanations of this cartridge.

The US Army chose it for their new Barrett MRAD sniper rifle for old reasons. And they worked with Hornady during its development.

Eric B.

 

[Litehiker]

I have a .300 Win mag HS Precision Rem.-actioned target rifle. Loading 215 to 230 Berger hybrids on H1000 is a PITA B/C of compressed loads. The 300 PRC should negate that problem nd Hornady brass will be good enough for now for your purposes.

Eric B.

 

[ar10ar15man]

if you read, the coal is 3.82. no compression
i have brass for 300 win mag
and i clearly said no to that brass..not my std.
lapua/nosler adg then maybe

I have a .300 Win mag HS Precision Rem.-actioned target rifle. Loading 215 to 230 Berger hybrids on H1000 is a PITA B/C of compressed loads. The 300 PRC should negate that problem nd Hornady brass will be good enough for now for your purposes.

Eric B.

 

[DUSTY NOGGIN]

is that jammed length?? what magazine did you use that had the 3.875 inner