Help Swarovski turrets 6-18x50 tds

Discussion in 'Rifles, Bullets, Barrels & Ballistics' started by bradaet, Jul 29, 2013.

  1. bradaet

    bradaet Well-Known Member

    Messages:
    126
    Joined:
    Mar 1, 2010
    I bought a Swarovski 6-18x50 with tds reticles
    The scope unknown to me has custom hunting caped (screw on caps) not tactical for a 7mm
    Which I do not shoot. Can I sight in my rifle and still use the tds reticles accurately for a different caliber? Why have custom hunting turrets installed when you have a tds reticles?
     
  2. varmintH8R

    varmintH8R Well-Known Member

    Messages:
    1,123
    Joined:
    Dec 12, 2011
    You can use the tds reticle for any load. Check out the Swarovski ballistics calculator and it will give you approximate ranges for each subtension based on your load and magnification:

    SWAROVSKI OPTIK - Ballistic Programs 1.27


    The rest of your post is unclear to me - it sounds like you have the ballistic turret model but someone replaced the factory asjustable turret with a custom one? If so, you can either go back to the factory one or have a new custom one made for your load. I believe there is a site-sponsor who makes them but for the life of me I can't think of them this morning . . .

    Good luck