If you order from GS have them air shipped!! It took 2 years to get the order I placed due to getting lost in ground shipping.
I ordered a few 375 bullets for the 375/50BMG but unfortunatly I sold the gun last fall and never did get a chance to see how they shot.
I also ordered a few .224 bullets for the 8 twist 22-250 but the gun is down for repairs waiting for funds to fix a poor chamber,thread and crown job....never asume the local smith knows what he is doing!!
In the order where a few 6.5 bullets too but I was in a nasty fall last summer and have yet to do any load work for the 6.5-284 or 6.5Sweede.The plan is to have the 6.5s up and running for antilope,deer hunting this fall.
His site has a lot of info that will have you reading and thinkin fer a long time and he has ben very helpfull in giveing advise to get his bullets shooting with a minimum of load work.Kinda spendy but I'm convident at this point that they will be at least acceptable,timel tell?The plan is to use wet telephone books for a backstop dureing load testing to se how they expand.
The pic showes a couple of his bullets against the competition.
From left to right
.224s(40Vmax,GS60grain HV,75Hornady HPBT,75Amax
.264s(95Vmax,GS110HV/HP/SP/BT,140SST,140Amax,375 cal 270grain Groovy bullet,750 grain Amax and a used barns coper sabot out of a 12ga