Do they make turrets for lightseeker 30s?

Discussion in 'Long Range Scopes and Other Optics' started by my82cam, Jul 29, 2012.

  1. my82cam

    my82cam Well-Known Member

    Messages:
    206
    Joined:
    Jun 3, 2012
    Hey guys, I have a pentax Lightseeker 30 on top of my heavy barrel 22-250. thing is a tack driver! I am wanting to get into a custom turret, question is, does anyone make a custom turret for this scope? I love the scope, but want to turn knobs, not guess at hold overs anymore. thanks
     
  2. Arrowhead

    Arrowhead Member

    Messages:
    5
    Joined:
    Dec 29, 2007
    If you have target knobs I can make you BDC tape that you could stick on your knob, 25$ shipping included

    Here are a couple of pics of some models I made

    Standard turret NF
    [​IMG]


    Nightforce scope with "High Rev" turret. You read numbers from top to bottom, red numbers are the MOA
    [​IMG]

    Nightforce high rev turret, integrated 5-10-15mph wind drift charts
    [​IMG]

    Also did this one for a Vortex
    [​IMG]

    Special order for a windage knob on a Sightron
    [​IMG]
    [​IMG]
     

  3. FEENIX

    FEENIX Well-Known Member

    Messages:
    9,806
    Joined:
    Dec 20, 2008
    The short answer is yes, try ...

    Recommended riflescopes which can mount a TTC. | Kenton Industries

    C&P

    $500-$800 Budget:

    -Pentax Lightseeker 8.5-32×44
    -Pentax Lightseeker-30mm 6-24×50 or 8.5-32×50
     
  4. my82cam

    my82cam Well-Known Member

    Messages:
    206
    Joined:
    Jun 3, 2012
    Thank you sir! I see one in my future from Kenton industries