Konrad.INc
Well-Known Member
Custom Remington 40xb blued and trued when barrel installed
30 inch Krieger stainless barrel 1-8 twist medium Palma contour, custom cerakote finish on barrel
Glass pilar bedded Hart laminated adjustable stock Hand stop rail and Harris bipod adapter inlet into stock
PTG aluminum bottom metal for AICS magazines
PTG custom bolt with spiral ground fluting and Sako extractor and blue bolt knob
Aluminum bolt shroud and lightweight firing pin
Crisp trigger set at 3.5lbs
.25 inch thick stainless steel pinned recoil lug
Caldwell pivot 9-13 inch bipod
EGW 20MOA one piece base with #8 screws
Warne fixed rings
6.5-20x50mm Leupold VX-3 long range target scope with duplex reticle and side focus
Rifle has 195 rounds down the barrel, shoots under 3/8 MOA with varget at just under 2900 fps or H4350 at 3050fps with a 142gr Sierra Matchking. Both loads can be found in load manuals and are not over max. I am recently engaged and my life/interests are moving in another direction so I need to sell it. If it wasn't for that you couldn't pry this rifle out of my hands because it shoots so well.
<a href="http://s170.photobucket.com/user/KonradINc/media/imagejpg1-1.jpg.html" target="_blank" rel="nofollow"><img src="http://i170.photobucket.com/albums/u246/KonradINc/imagejpg1-1.jpg" border="0" alt=" photo imagejpg1-1.jpg"></a>
<a href="http://s170.photobucket.com/user/KonradINc/media/imagejpg3-1.jpg.html" target="_blank" rel="nofollow"><img src="http://i170.photobucket.com/albums/u246/KonradINc/imagejpg3-1.jpg" border="0" alt=" photo imagejpg3-1.jpg"></a>
<a href="http://s170.photobucket.com/user/KonradINc/media/imagejpg7-1.jpg.html" target="_blank" rel="nofollow"><img src="http://i170.photobucket.com/albums/u246/KonradINc/imagejpg7-1.jpg" border="0" alt=" photo imagejpg7-1.jpg"></a>
30 inch Krieger stainless barrel 1-8 twist medium Palma contour, custom cerakote finish on barrel
Glass pilar bedded Hart laminated adjustable stock Hand stop rail and Harris bipod adapter inlet into stock
PTG aluminum bottom metal for AICS magazines
PTG custom bolt with spiral ground fluting and Sako extractor and blue bolt knob
Aluminum bolt shroud and lightweight firing pin
Crisp trigger set at 3.5lbs
.25 inch thick stainless steel pinned recoil lug
Caldwell pivot 9-13 inch bipod
EGW 20MOA one piece base with #8 screws
Warne fixed rings
6.5-20x50mm Leupold VX-3 long range target scope with duplex reticle and side focus
Rifle has 195 rounds down the barrel, shoots under 3/8 MOA with varget at just under 2900 fps or H4350 at 3050fps with a 142gr Sierra Matchking. Both loads can be found in load manuals and are not over max. I am recently engaged and my life/interests are moving in another direction so I need to sell it. If it wasn't for that you couldn't pry this rifle out of my hands because it shoots so well.
<a href="http://s170.photobucket.com/user/KonradINc/media/imagejpg1-1.jpg.html" target="_blank" rel="nofollow"><img src="http://i170.photobucket.com/albums/u246/KonradINc/imagejpg1-1.jpg" border="0" alt=" photo imagejpg1-1.jpg"></a>
<a href="http://s170.photobucket.com/user/KonradINc/media/imagejpg3-1.jpg.html" target="_blank" rel="nofollow"><img src="http://i170.photobucket.com/albums/u246/KonradINc/imagejpg3-1.jpg" border="0" alt=" photo imagejpg3-1.jpg"></a>
<a href="http://s170.photobucket.com/user/KonradINc/media/imagejpg7-1.jpg.html" target="_blank" rel="nofollow"><img src="http://i170.photobucket.com/albums/u246/KonradINc/imagejpg7-1.jpg" border="0" alt=" photo imagejpg7-1.jpg"></a>
