Carl Ziess scope issue.Help please.

C Gamboa

Member
Joined
Nov 15, 2010
Messages
18
Location
Mérida Yuc Mexico
I have a 3.4X14-50 Conquest Ziess scope.on a .243 CZ (mod 550), it has being taken to the range just a few times.It was in hig rings and it funtioned ¨normaly¨; I decided to change the rings for a pair of lower profile,(both of them original CZ).
When I tried to sight the scope,I noticed that the knob for widage (Right-left adjustment), turned only a limited number of clicks for left adjustment,but a lot to the right.Fortunately I cud Zero it at 200 meters with the last click,as a matter of fact ,I cud return 1 click,but that is all I have for left adjustment (1 click).
The only issue I can think of,is that I probably tightened the rings too much ?.
In my country for some ¨strange¨ laws,I can´t send it to the factory by mail,and we have no dealers.So I have to fix it by myself.
Any input will be apreciated.
 
Doesn't sound like it's your scope. It's your rings being too far out of alignment with your barrel and action. You could try windage adjustable bases and rings from Leupold, Redfield, or Burris. Or better yet get signature zee rings from Burris with the offset insert kit so you can use weaver or picannty bases. The offset insert kit will allow you to get your scope centered or canted for long range. I try to use the signature rings whenever I can for their great grip and no scope ring marks.
 
Thank you for your advise.It sounds like music for my ears. I checked last night,and Cz bases are not the best at all.I´l try to get those bases.
Thanks again.
 
Warning! This thread is more than 14 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Recent Posts

Top