Burris Signature Z-Rings

Discussion in 'Long Range Scopes and Other Optics' started by dwm, Mar 7, 2008.

  1. dwm

    dwm Well-Known Member

    Messages:
    739
    Joined:
    Feb 26, 2003
    Is there a trick to installing the inserts?

    I am starting with the 0 moa inserts, do the inserts have to be lined up with the cap and base?

    The inserts rotate with the scope tube when the scope tube is turned to level the reticle, does this matter if the gap in the inserts are not aligned with the ring gaps?

    Thanks,

    Doug
     
  2. Tyler Kemp

    Tyler Kemp SPONSOR

    Messages:
    1,461
    Joined:
    Aug 10, 2006
    I don't think it should matter on the 0 inserts, but on a insert that alters where your scope is pointing it would make a big difference.
     

  3. Buffalobob

    Buffalobob Writers Guild

    Messages:
    5,083
    Joined:
    Jun 12, 2001
    Get some alcohol and paper towels and Q tips and degrease everything real well, especially the threads in the rings.

    Don't drink the rubbing alcohol either because decreasing your intestines is not a good idea.:D