Anyone tried lucus oil extreme clp

[tbrice23]

https://www.midwayusa.com/product/8...ent-lubricant-rust-preventative-11-oz-aerosol
I'm almost out of Break Free CLP and was going to order more and came across this. Just wondering if anyone has used this?
Add, I mostly use CLP as a cleaner and rust prevention in my sizing dies after I blast the inside with Break cleaner.

 

[dok7mm]

I used CPL for awhile, but went to EEZOX for barrel storage and for die protection. It is available in spray or liquid and does a fine job. I got mine from guntap.com.

 

[tbrice23]

Does it evaporate into a muddy after left set for a while?

 

[dok7mm]

No, it has a dry finish, reacts similar to Hornady One Shot. There was a test of just about every anti-rust agent a couple years back and EEZOX was the winner, even in damp conditions, and salt water humidity. That's how I got on to it. Tried, but couldn't find the link.

 

[just country]

morning, Safari Charlie preservative and quicksilver carburetor cleaner.
I was at the range one day, and older gent. was shooting
a single shot 308 bolt gun. every ten shots the gent
would clean the barrel with quicksilver carb. cleaner.
asked him about the cleaner. said the cleaner cleans
and lubs at the same time. both work great!!
I put a cotton ball in the bore at the barrel end and
shoot the carb. cleaner till the chamber and barrel r full.
doing this several times. over night in the morning
I pull the cotton ball and I find carbon and metal bullet
filings on a metal tin I put under the barrel.
then I cleaning rod the barrel. before firing I spray
the chamber with brake cleaner to remove any lub residue.
shooters have their own process.
justme gbot tum