I purchased a couple of the 2 oz. bedding kits from Stocky's Stocks for $15 each. I was able to bed the recoil lug area on 7 different rifles with just one of the kits (again, this was bedding just the recoil lug area on custom stocks). It made a tremendous difference with tightening up my groups (I was having some poi shifts prior to bedding), especially with my larger magnum rifles (i.e. 338 RUM and 300 RUM).Thanks for the info everyone. What are your thoughts on only spot bedding the recoil lug area like they show on of gunwerks' youtube vids?
These kits come with pretty much everything you need: 1. epoxy (1:1 mix ratio) and gives you about 1 hour work time; 2. release agent with applicators; and 3. latex gloves. I had to provide my own painters tape, and white vinegar to wipe away any excess epoxy during the application process. It was set-up well within 12 to 15 hours, and I let it cure another 3 to 7 days before resuming shooting. The kit suggests 24 - 48 hours.
The following pics were of the best results after I did an OCW ladder, followed by a bullet seating ladder at 100 yards (3 shot groups). As I mentioned previously, the overall results were fantastic.