6.5 Creed Shorty Rifle Loads

nt7332

Well-Known Member
Joined
Nov 24, 2016
Messages
1,001
Location
Rio Rancho NM
Any one running short barreled 6.5 creed with some of the lighter bullets? Need some ideas on bullets and powder selection. I run 4350 in most of my longer barreled rigs but thinking maybe there is a better option for powder in a 16.5" barrel and lighter bullets like 95 grainers or similar. Any help would be appreciated.
 
Rifle is a 8 twist 16.5" barrel on a Mausingfield in a bravo chassis.
06974F00-6AE9-4613-98C8-09AB81F604D7.jpeg
5CAD1470-CE57-4BD1-9B1E-0D5476A0C39E.jpeg
2C5CD6E3-2286-4A66-A9AE-9A1B7DD52565.jpeg
 
Any one running short barreled 6.5 creed with some of the lighter bullets? Need some ideas on bullets and powder selection. I run 4350 in most of my longer barreled rigs but thinking maybe there is a better option for powder in a 16.5" barrel and lighter bullets like 95 grainers or similar. Any help would be appreciated.
I have an AR-10 I built for South Dakota mountain lion hunting in 6.5 Creedmoor with a Faxon 16.5" barrel. With Barnes 127gr. bullets over 44gr of RL-16 I am getting 2570fps (MagnetoSpeed V3) on average with them and I have been super happy with the results.
 
I run 143 eldx using ~43 grains RL16 at 2750 (magnetospeed) from a 20" Tikka 1:8 CTR Can push 'em faster but they shoot good at 2750
 
I appreciate all the info. I have plenty of loads for heavier 140-147 bullets. Looking for light bullet loads. Thanks fellows
 
123 lapuas @ 2900 shoot very good with super superformance. I bet rl26 will push them over 3000. But the superformance shoots bug holes. Works great on whitetail.
Shep
 
I appreciate all the info. I have plenty of loads for heavier 140-147 bullets. Looking for light bullet loads. Thanks fellows
What do you consider as "light"? To me, in the 6.5mm caliber, anything less than 140gr. is light (hence why I posted my 127gr data above). I know you mentioned the 95gr or similar but how far from the 95gr. are you willing to go and to what purpose are you loading this for? I think a bit more information could help everyone out.
 
Warning! This thread is more than 5 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top