37XC

Terry Balding

Well-Known Member
Joined
Dec 28, 2013
Messages
250
Location
6649 Tartan Trail, Sun Prairie, WI 53590
37XC, Geske action, RAD, Terminator T5 brake, Broughton 5C 29" barrel, Joy Pod, Bix N Andy trigger. 37XC 1.jpg37XC 2.jpg37XC 3.jpg37XC 4.jpg37XC 5.jpg
 
I shot it yesterday for the first time. Started with 110 grains. Tested H 50 BMG, RL 33, H 1000, Retumbo, and VV570. The H1000 and 570 were more interesting. Did the shot and clean routine. Then tried 116 gr. H1000, finally 120 gr. Of H1000 which yielded 3068fps with 350 grain Sierra's jammed.

The greatest supprise was the lack of recoil. The T5 brake was so good that I removed the RAD.

I'm looking forward to load development.
 
Glad to see everything is coming together well for you Terry, nice looking rifle and it should be fun seeing what the limits are as how far you can push it with consistency. I see some good times ahead stretching things out. Cheers


Iamosoh
 
I shot the 37XC and the 338 Edge last weekend at the Dasher Dome in Dixon Springs, TN.

The 338 Edge shot well, and I came up with some improvements on the XC. I will be fitting it with a new scope rail.
The dovetail to picatinny adapter did not hold up well.

I'm looking for some RL26 (like everyone) for the Edge. It shoots 256's at 3250 with it.
 
Are u finding the faster powders like H1000 are giving you better velocity and s.d.'s with the 350gr-405gr bullets than retumbo, 8133, v570, re33 burn rate powders?
 
If the H1000 rate powders are working out better I'm sure v560& v565 would be really good as well
 
Are u finding the faster powders like H1000 are giving you better velocity and s.d.'s with the 350gr-405gr bullets than retumbo, 8133, v570, re33 burn rate powders?
I switched to H1000 from N570 in my 37xc shooting Warner 361's.
WAY better SD's and a little more velocity with nearly the same charge weight
120.5 gr H1000
361 Warner
3108fps
36" barrel
ES 14 (over 40 rounds)
 
Last edited:
Warning! This thread is more than 5 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Recent Posts

Top