300wm H1000 loads

[Flatbow]

IMR 7977 with mag primer or 7828 using only large rifle primers

Both of these powders are discontinued so unless you already have a bunch don't waste your time looking.
7828ssc is still available

 

[Bucklowery]

Mine are the 190 smk with H-1000 but soon as they are gone it will be hammers

Thanks

Buck

 

[victor3ranger]

What bullets, i.e., Berger, Hornady, etc.? I have three 300 WMs, all shooting better with >180. If you have not seen it, do a search; BROZ has a thread with overwhelming success with Berger 210/215 and an H1000 load.

I have TTSX, Nos AB's, and Norma 170 Tipped.

 

[victor3ranger]

Both of these powders are discontinued so unless you already have a bunch don't waste your time looking.
7828ssc is still available

I can't find any 7828ssc, that is what I am using in my 7stw loads

 

[Marky_mark]

H4350 for all 300 wsm loads

 

[terry 338rum]

i use 4831sc with 210 bergers. have shot 1/2 group at 400 yds .

 

[bballard]

I pretty much use all reloader 22 powder for my 300 win mags. That powder has been hard to find. Some say it's not very temp stable, but I hunt mostly when it is cool in the fall and have not ever had any issues....from the dakota plains to the brooks range. Pretty much what I like in my 7 mags too. For bullet weights in my 300's, I like the 200 grain accubonds over the typical 180's. They have a higher BC and fly flatter. Just my 2 cents....

 

[asd9055]

What do you suggest??
I like to stick with IMR or H powders

Might be better to say the powders and bullets you have access to, then people may make suggestions.
Old relaodersnest site had many suggestions on 165, 170 bullets with various powders. I still have access to some of those

 

[K.E.C.]

View attachment 572084
View attachment 572085

This^^^^^^^^^^^^^^^.
I ran Swift Scirocco 165 with H-1000 and
Rl- 25 and 26. In a 26" Model 70.
Max with both was around 82,83.
Start around 75,76.
Will be Compressed Loads. Drop tube will help or vibration.
For more case fill use 3rd and up fired brass. BEEE CAREFUL AS ALWAYS.
PM if need help

 

[Flatbow]

I can't find any 7828ssc, that is what I am using in my 7stw loads

Didn't say it would be easy to find just that it is not discontinued

 

[victor3ranger]

Didn't say it would be easy to find just that it is not discontinued

That's true

 

[K.E.C.]

What Powders do you have, that you can use, or are you just curious about H1000.
I have been playing with a 300WM of some kind over 40yrs.
Just trying to help.

 

[Laguna Freak]

There is no way ANY powder is more temp stable than H4350…

Cheers.

That has not been my experience shooting both through 30-06 in S. TX heat.

 

[Rflshootr]

I've had my best accuracy with RE-22 and 165's.