270 wby

[Yotebuster]

I have some 130 gr hornady GMX, some 130 Nosler accubonds and 130 gr Nosler BT anyone have any pet loads for their gun, Mine is a Mark V accumark Weatherby. I have IMR 4350 and 7828 on hand as well. Want to try some Bergrs in the gun as well.

 

[Long Time Long Ranger]

I had a good load with 7828 and cci 250 primers over 3500 fps with the 130's. I think it was around 77 grains. 74 grains of H4831 was very accurate at a little over 3400 fps. These are max loads out of my mk 5 action.

 

[C.O. Shooter]

Federal 210M primer, powder 67 gr. IMR 7828, 140 gr Nosler Accubond, OAL 3.420"

This is for 140's if you try them!

 

[backwoods83]

I never shot the 130s but I did shoot the 140 NABs in wetherby brass, with CCI BR2 primers and 73grns of H4831sc, that's getting very close to the limits and maybe over in your rifle, OAL was 3.325", MV 3432fps from 28" McGowen 10 twist.

 

[Yotebuster]

I'll look at the loads thanks all..

DAN