Wyatt’s extended mag box length question

[Trm82]

I was wondering if anybody knows the length that a Wyatt's extended mag box give a guy in a rem 700 long action (300 ultra ) ?
I tried the website and it seemed pretty vague.
Thanks.

 

[KRP]

The listings for the mag boxes only(not the kit) on Wyatt's site give dimensions. The stagger feed and short center feed are 3.825 inside and the long center feed is 3.99 inside.

 

[Wedgy]

You can run up to a 4" box CFE-9 Kit on a 700, the CFE-12 is 3.830"

Here's his install video;

Installing the CFE 9 Magazine Box - Wyatt's Outdoor

wyattsoutdoor.com

 

[Trm82]

Thanks a lot guys

 

[Mike D Texas]

What box would be compatible with 6.5 SAUM? And is a Kelbly's Atlas Tactical receiver compatible with a BDL floor plate and internal magazine?

 

[Kmccord]

What box would be compatible with 6.5 SAUM? And is a Kelbly's Atlas Tactical receiver compatible with a BDL floor plate and internal magazine?

I would contact Kelbly on that one, I believe the SA in Kelbly Atlas Tactical is for DBM, but you would need to contact them to be sure.

 

[Mike D Texas]

I would contact Kelbly on that one, I believe the SA in Kelbly Atlas Tactical is for DBM, but you would need to contact them to be sure.

I believe that is correct and I run a DBM on my current Kelbly. I just have an application where it would be good to be able to seat out past 3.000".

 

[Kmccord]

I believe that is correct and I run a DBM on my current Kelbly. I just have an application where it would be good to be able to seat out past 3.000".

I am almost positive, when you order a SA you will need to tell them you plan to use a BDL, I believe they have to open up the feeding, again contact them and find out for sure.

 

[Wedgy]

The issue on most customs is modifying the bolt stop, or better said not being able to modify the side bolt stop to lengthen it. You could also call Kevin at Wyatt's and ask 541-776-8417

 

[Slick8]

Defiance makes actions ready for wyatts boxes including the budget friendly tenacity.