Wind Gypsy
Well-Known Member
- Joined
- Feb 26, 2015
- Messages
- 154
I'm selling this Seekins Havak that has a 26" Bartlein Carbon #4 9 Twist barrel chambered by TS Custom. The chamber was spec'd to seat the 215+ bergers, 0.200" freebore i believe. Less than 200 rounds on the bartlein barrel. It has one of the new action/bolts that runs much smoother than the orginal havak actions. Included with it I'll also ship a factory seekins barrel that has less than 200 rounds on it. It has an area 419 hellfire brake w/ 5/8" thread adapter. Comes with 2 carbon magazines. Scope and rings not included.
$1890 shipped in lower 48. I accept Venmo, PayPal F&F or buyer pays fees, and am open to other options.
I have Redding type s dies, lapua and nosler brass, giraud trimmer case holder, and possibly some bullets if buyer is interested.
There's a couple slight dings in brake ports from me sticking a screwdriver through to remove the brake.
I was trying to get the butt pad off to insert spacers and thought these shims my have been glued in so made this little oops trying to get it off.
This rifle with the factory steel barrel was a warranty replacement for the first one I had that was a dud. Seekins sent these targets to show they tested this one before sending it out. While the targets show it shoots plenty well with their proof ammo, it didn't shoot 215 bergers or 212 ELDx as well as I wanted it to so I had TS custom chamber the bartlein for it and that bartlein shoots both bullets well in any configuration i've tried them.
$1890 shipped in lower 48. I accept Venmo, PayPal F&F or buyer pays fees, and am open to other options.
I have Redding type s dies, lapua and nosler brass, giraud trimmer case holder, and possibly some bullets if buyer is interested.
There's a couple slight dings in brake ports from me sticking a screwdriver through to remove the brake.
I was trying to get the butt pad off to insert spacers and thought these shims my have been glued in so made this little oops trying to get it off.
This rifle with the factory steel barrel was a warranty replacement for the first one I had that was a dud. Seekins sent these targets to show they tested this one before sending it out. While the targets show it shoots plenty well with their proof ammo, it didn't shoot 215 bergers or 212 ELDx as well as I wanted it to so I had TS custom chamber the bartlein for it and that bartlein shoots both bullets well in any configuration i've tried them.
