• You must be a Supporting Member to create a listing in the Long Range Hunting Marketplace. To read all the rules, click here.

    We offer multiple options to become a Supporting Member here.

SOLD/EXPIRED WTB 257 Weatherby Brass...

I looked at the case dimension of the 257 and the 7mm. They are almost identical. Can you neck down some 7mm? I have some extra in both brass and nickel.

Rocky
 
257 Wby

I have some .257 Wby brass, will have to dig it out and see how many I have.
You have a pm Tap. Rocky I have some 7mm stuff just haven't necked any down right now I just want to deal with the WBY brass thanks though..
 
I wouldn't even try necking down 7mm brass. I used to have a .257 WBY & wanted to fit my new PMC brass to the chamber by necking my brass up in a .270 WBY sizing die, then back down to .257, little by little, to create "artificial" headspace. The brass sized up to 270 neatly, but I collapsed a few necks sizing them back down. It was about that time that I discovered my .257 had a bad chamber, and I had just "uglified" about a hundred dollars worth of brass. I threw all the brass in the scrap barrel. That was about the fastest I ever went through a hundred dollars with a gun. The famous Weatherby "double radius" neck did me in.
 
Top