Tools for LR Shooting with SP's from the Sitting Position

Discussion in 'Specialty Handgun Hunting' started by Ernie, May 21, 2012.

  1. Ernie

    Ernie SPONSOR

    Messages:
    2,844
    Joined:
    Jun 18, 2007
    On Saturday I put on the 3rd Church Steel Shoot for my congregation.
    Distances were from around 275 yards out to around 800 yards.
    Then for fun we back up to 1150 yards. I shot both XP's at 1150, but from the prone position.
    We had good conditions towards the end of the day and hitting the target got be be boringly fun.

    I shot the the 284 Win XP and the 7mm SAUM XP from the sitting position at 400-675 yards.
    They both shot real good.
    SIDE NOTE: One thing I discovered on 284 Win is that I kept shooting high (just developed hte load last week and had not had the time to confirm drops).
    Came home and added MV until it matched my drops at 675 and 1150 yards.
    Currently working with a MV of 2759 with the 168 SMK. YIPEE!
    Further confirming of drops will likely end up tweaking the speed/BC some more until the drops are hardened.

    With all of that said I also used two different shooting rests for use when hunting in the seated position.
    I was able to get out consistently out to 675 yards.
    I did miss a couple of times at the 640+, but out to a little over 500 yards it was pretty much a sure thing with both designs.
    I am pretty excited over that.

    The BOG-GEAR/BOG-POD tri-pod is their CLD-3 combined with the PSR.
    BOG-POD's site:
    BOGgear.com | Makers of BOG-POD® Tripods, Bipods, & Monopods
    [​IMG]
    At around 500 yards I started to use a soft stadium seat to give me some support/stability.
    Joel, my hunting buddy shot the 7 SAUM XP at 403 or 405 (can't remember).
    He made two first shot connections with it and had never used it before.
    [​IMG]

    The other set-up with my Rear grip XP in 284 Win (McRee stock) is
    Carbon fiber Promaster 325P with "The Claw."
    They have updated the CLAW and now have the TriClawps as well.
    Home | Tripod Mounted Rifle Rest |Triclawps
    [​IMG]
    [​IMG]

    BOG-GEAR's product is more lightweight, flexible and economical to use over a Carbon Fiber Tri-pod with The CLAW or their new TRI-CLAWPS.

    At first, I thought the CLAW would have a big advantage, but it didn't.

    This is my 2nd time to use BOG-GEAR's CDL-3 with the PSR at distance.

    If one had an easy to adjust mono-pod that would work well with the grip of pistol combined with the tri-pod/CLAW one could get even further and with greater ease.

    It took a lot of focus and fiddling with stance and grip to be accurate, but it is very possible.
    I am going to be doing more work with both systems, and I really think that for the type of hunting I do, BOG-GEAR/BOG-POD is going to be my go to set-up.
     
  2. Ernie

    Ernie SPONSOR

    Messages:
    2,844
    Joined:
    Jun 18, 2007
    The head/pin relationship is a little to "loose" for longer distances so I thought I would put some Teflon tape around the pin that fits into the head of the tripod.
    I could immediately tell it tightened things up.
    I intentionally did not do this on Saturday because I wanted to see how far I could go distance wise with it being unmodified.
     

  3. bfr4570

    bfr4570 Well-Known Member

    Messages:
    269
    Joined:
    Mar 29, 2010
    Alright something else to spend money on:D
     
  4. magicofmt

    magicofmt Well-Known Member

    Messages:
    441
    Joined:
    May 9, 2005
    You and your huntin buddy are shooting with the wrong hand.
    Looks like fun.
    How big was the steel?
     
  5. Mark Mck

    Mark Mck New Member

    Messages:
    3
    Joined:
    May 24, 2012
    Nice post. I like your setup. It looks like it would be portable enough to walk and stalk with. I have found my XPs to be most accurate when I shoot off sandbags but they are not something I care to carry much. This setup looks solid and adjustable.gun)
     
  6. Ernie

    Ernie SPONSOR

    Messages:
    2,844
    Joined:
    Jun 18, 2007
    Some is 10 round or square. Also have a couple 12 inch squares
    I dohave some that is 10x16 too