STW/TSX load

[wadevb1]

Just took posession of an unfired Sendero 7STW (still in the box). I have found numerous Accubond loads but would appreciate any loads for the 140gn TSX. I have pounds of RL22, H1000 and 7828 from my WBY STW that I couldn't get to group.

Thanks in advance, Wade

 

[redbone]

Wade



That sould like you found an good one .

If you would like to sale it just let me know .


I will try to buy your the Rifle .


Redbone

 

[wadevb1]

Was listed in the classifieds here for a minute. I jumped all over it. I had it for a full hour before I posted a request for loads. I'll take this one to the grave. But if anyone has some good 140gn TSX load, I'd appreciate. I know the 160's rule but I had a box laying around.

 

[Blacktail]

72.5 up to 75 gr of H4831 all held right about 3/4 inch i set it at .05 off the lands. Havent had time to try anything else. I think the 75 were moving at 3350

 

[NYLES]

STX 140GR TSX BT, MRX BT, AND BANDED SPITZER


MIN fps MAX fps load density

RL22 77.5 3208 82 3405 95%

H1000 81 3121 86 3306 100%.....shows most accurate

IMR 7828SSC 78 3161 82 3360 92%



From Barnes Copper Club load data what will be printed in Vol 4

 

[284STW]

I have worked up to 86 gr Retumbo behind 140 tsx's without getting into crazy pressures. Retumbo continues to be my go to powder for every bullet I have tried in my STW.

 

[shiredude]

dont mean to hijack the thread, but...... to what length are you guys loading your 140 grainers?