STW/TSX load

Discussion in 'Reloading' started by wadevb1, Oct 13, 2007.

  1. wadevb1

    wadevb1 Well-Known Member

    Messages:
    218
    Joined:
    Nov 16, 2004
    Just took posession of an unfired Sendero 7STW (still in the box). I have found numerous Accubond loads but would appreciate any loads for the 140gn TSX. I have pounds of RL22, H1000 and 7828 from my WBY STW that I couldn't get to group.

    Thanks in advance, Wade
     
  2. redbone

    redbone Well-Known Member

    Messages:
    688
    Joined:
    Jul 3, 2005
    Wade



    That sould like you found an good one .

    If you would like to sale it just let me know .


    I will try to buy your the Rifle .


    Redbone
     

  3. wadevb1

    wadevb1 Well-Known Member

    Messages:
    218
    Joined:
    Nov 16, 2004
    Was listed in the classifieds here for a minute. I jumped all over it. I had it for a full hour before I posted a request for loads. I'll take this one to the grave. But if anyone has some good 140gn TSX load, I'd appreciate. I know the 160's rule but I had a box laying around.
     
  4. Blacktail

    Blacktail Well-Known Member

    Messages:
    311
    Joined:
    May 12, 2006
    72.5 up to 75 gr of H4831 all held right about 3/4 inch i set it at .05 off the lands. Havent had time to try anything else. I think the 75 were moving at 3350
     
  5. NYLES

    NYLES Well-Known Member

    Messages:
    773
    Joined:
    Dec 18, 2006
    STX 140GR TSX BT, MRX BT, AND BANDED SPITZER


    MIN fps MAX fps load density

    RL22 77.5 3208 82 3405 95%

    H1000 81 3121 86 3306 100%.....shows most accurate

    IMR 7828SSC 78 3161 82 3360 92%



    From Barnes Copper Club load data what will be printed in Vol 4
     
    Last edited: Oct 16, 2007
  6. 284STW

    284STW Well-Known Member

    Messages:
    45
    Joined:
    Dec 15, 2006
    I have worked up to 86 gr Retumbo behind 140 tsx's without getting into crazy pressures. Retumbo continues to be my go to powder for every bullet I have tried in my STW.
     
  7. shiredude

    shiredude Writers Guild

    Messages:
    170
    Joined:
    Aug 20, 2007
    dont mean to hijack the thread, but...... to what length are you guys loading your 140 grainers?