I got some 120 gr RBBT Wildcats to play with in my .25-06; however, I did not want to alter my die setting from my 75 gr Barnes X, 87 gr Speers or any of the NBTs. They all shoot great with the same setting. I put the spacer from a .38/357 or 44S&W/44Mag die to seat the 120s out a bit further. Works like a champ with the RBBT right at the shoulder/neck junction. The bullet ended up about 0.003" into the lands with that setting. I have a ladder loaded up to see if I am going to have any potential loads with these bullets in my .25-06 or if they will have to wait on my future creation!
.25-06 WW M70
WW brass/WLR
Retumbo up to 61 grs
3.340" coal - feeds in mag too
.25-06 WW M70
WW brass/WLR
Retumbo up to 61 grs
3.340" coal - feeds in mag too