Hi there, I have a first generation long action Sendero build I am looking to part with.
Chambered in 284 Winchester with brand new PTG reamer [used once & included], 29" Lilja 3-groove bead blasted stainless Heavy Varmint barrel. Original first generation HS-Precision stock has been opened up flawlessly to accomodate barrel contour and has been glass bedded. 284 is built on a long action 700 action to unleash full cartridge potenetial in regards to bullet seating depth. Rifle built & all work done by John King of King Machine in Kila, MT. Front of action has been trued and bolt races and threads have been gone through before build. Pinned recoil lug. Benchrest single shot follower over fully functional hinged floorplate (if repeater is desired). Gre-Tan lightweight firing pin and spring installed, unmodified Jewell trigger [right hand safety] currently set at 8oz, but fully adjustable. Butt stock has internal weight added to balance rifle perfectly: approximately 16 lbs total weight. As stated, rifle will come with Pacific Tool & Gauge 284 finishing reamer made to these specs: .315 neck, .210 freebore. Reamer was designed with Dave Kiff at PT&G throated for 180gr Bergers, but rifle has also been fired with Accubonds. Incredibly accurate rifle, have had 1/3 MOA results at 300 yds. Comes with PT&G GO gauge for future rebarelling. Also comes with Redding Competition Bushing dies (originally $350), Lapua neck turned brass and unopened box of 180gr Berger Hunters. Rifle hass approx 100 rounds fired through it and barrel in completely broken-in. Rifle was completed in Spring of 2014. All build paperwork, documentation & receipts included. This is a beautiful and very accurate rifle built by one of the best [who may not be in the business much longer]. Much more to be said about rifle, please ask any questions and I will be happy to respond to the best of my ability. Accepting reasonable offers.
Chambered in 284 Winchester with brand new PTG reamer [used once & included], 29" Lilja 3-groove bead blasted stainless Heavy Varmint barrel. Original first generation HS-Precision stock has been opened up flawlessly to accomodate barrel contour and has been glass bedded. 284 is built on a long action 700 action to unleash full cartridge potenetial in regards to bullet seating depth. Rifle built & all work done by John King of King Machine in Kila, MT. Front of action has been trued and bolt races and threads have been gone through before build. Pinned recoil lug. Benchrest single shot follower over fully functional hinged floorplate (if repeater is desired). Gre-Tan lightweight firing pin and spring installed, unmodified Jewell trigger [right hand safety] currently set at 8oz, but fully adjustable. Butt stock has internal weight added to balance rifle perfectly: approximately 16 lbs total weight. As stated, rifle will come with Pacific Tool & Gauge 284 finishing reamer made to these specs: .315 neck, .210 freebore. Reamer was designed with Dave Kiff at PT&G throated for 180gr Bergers, but rifle has also been fired with Accubonds. Incredibly accurate rifle, have had 1/3 MOA results at 300 yds. Comes with PT&G GO gauge for future rebarelling. Also comes with Redding Competition Bushing dies (originally $350), Lapua neck turned brass and unopened box of 180gr Berger Hunters. Rifle hass approx 100 rounds fired through it and barrel in completely broken-in. Rifle was completed in Spring of 2014. All build paperwork, documentation & receipts included. This is a beautiful and very accurate rifle built by one of the best [who may not be in the business much longer]. Much more to be said about rifle, please ask any questions and I will be happy to respond to the best of my ability. Accepting reasonable offers.
Last edited:
