Reloading for Future 460 S&W

[sparkyv]

I'm saving up for a 460 S&W handgun, and am researching projectiles for reloading. I need to account for these expenses in my budgetary planning Without having one yet to measure the cylinder throats, what diameter for cast/coated projectiles do most of you who reload for the 460SW use?

 

[memtb]

I "slugged" my barrel, and went a couple of thousandths over for my mold dimensions. I can't remember the exact number....I've slept a few times since! memtb

 

[memtb]

If you are going to cast for it, take a look at Accuratemolds. I think you "will" be impressed! memtb

http://accuratemolds.com/catalog.php

 

[sparkyv]

Nope, not going to cast my own.

 

[KDF22]

I'm shooting cast .452 bullets flat nose 325 grain with H110 powder. I've been shooting mild loads with 32 grains of powder. This is for a Mag Research revolver.

 

[sparkyv]

I'm shooting cast .452 bullets flat nose 325 grain with H110 powder. I've been shooting mild loads with 32 grains of powder. This is for a Mag Research revolver.

Thanks for the feedback, KDF22. I use H110 for my 44, so I'm also good to go with the powder.