infidel 811
Well-Known Member
- Joined
- Jun 3, 2013
- Messages
- 68
hey guys, I switched over to a diff batch of once fired Winchester brass for my 300wm. It wont chamber, so I tried to put it in the redding body die and my brass feels like its going to get STUCK, and don't want to force it and it needs a bunch of pressure to get out of die. I have the 3pc redding comp dies. I put case lube on the case before going into body die. it did nothing to shoulder bump. almost like case is to big for die feels like. The case has about an inch before it would be fully in die. also using the redding stepped shell holders, I use .010 for my other good brass. should I use a different size shell older? any help would be great!
thanks
thanks