Project finished 300 ultramag

dakotagoon

Well-Known Member
Joined
Jun 11, 2004
Messages
56
Location
Arnegard North Dakota
Finally completed Rem 700 300 UM bedded in a McMillan A-4 (black & olive marble) adjustable stock, vais muzzle brake, HS Precision bottom metal, BO oversized knob, trued and lapped. IOR 20moa base with TPS rings and SS 16x scope, ready for the range hopefully this weekend for break in and load work.
000_0004.jpg
000_0002.jpg
000_0008.jpg
 
Nice gun
smile.gif
What can you say when plan comes together? I've been looking at the high BC bullets out of Idaho. What's the barrel length?
 
26" PSS barrel with threaded muzzle for brake. Using 91 grains of H100, Fed Primes in Rem brass with SMK 220gr. First shots fired went .25 for a 5 shot group and stayed under .5. Went to 650 yds for last go round and stayed under 4" but I think it will do better (adjusting trigger down to 3# from 4.5#)than that if I do my part.
 
Warning! This thread is more than 20 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Recent Posts

Top