I'm new to reloading and need to know the proper procedure to develop a load. What is the correct order : experimenting with seating depth, experimenting with different powders and experimenting with different bullets. I'm confused. Please help...
I'm new to reloading and need to know the proper procedure to develop a load. What is the correct order : experimenting with seating depth, experimenting with different powders and experimenting with different bullets. I'm confused. Please help...
I pick a bullet and powder ,get the OAL from a load book ,with .308 i work up from low to high in .5 grain steps,i use .3 increments in .223. Usually have 8 to 10 loads in a set ,i would shoot al least two sets at 200+ yards and compare the tagets and you will have a good load when youre done. Then you can fine tune with OAL tuning.