Need rem 6.8mm reload data

Discussion in 'Reloading' started by cwcbwdtx, Feb 10, 2009.

  1. cwcbwdtx

    cwcbwdtx Well-Known Member

    Messages:
    57
    Joined:
    Oct 12, 2005
    Does anyone have data on the rem 6.8mm, using 110 gr bullet, using varget?

    Thanks
     
  2. bowhunthard

    bowhunthard Well-Known Member

    Messages:
    979
    Joined:
    Sep 5, 2008
    Cartridge: 6.8 mm Remington SPCLoad Type: RifleStarting Loads
    Maximum Loads
    Bullet Weight (Gr.)ManufacturerPowderBullet Diam.C.O.L.Grs.Vel. (ft/s)PressureGrs.Vel. (ft/s)Pressure 110 GR. HDY V-MAX Hodgdon H335 .277" 2.260" 27.0 2487 41,700 PSI 29.5 2694 53,600 PSI 110 GR. HDY V-MAX Hodgdon H4895 .277" 2.260" 27.0 2335 33,900 PSI 29.0C 2550 42,400 PSI 110 GR. HDY V-MAX IMR IMR 3031 .277" 2.260" 26.0 2450 42,100 PSI 28.0C 2605 48,700 PSI 110 GR. HDY V-MAX Hodgdon Benchmark .277" 2.260" 27.0 2518 44,000 PSI 28.8C 2665 52,000 PSI 110 GR. HDY V-MAX Hodgdon H322 .277" 2.260" 27.0 2571 47,600 PSI 29.0C 2697 53,600 PSI 110 GR. HDY V-MAX IMR IMR 4198 .277" 2.260" 22.0 2422 41,700 PSI 24.2C 2619 51,300 PSI 110 GR. HDY V-MAX Hodgdon H4198 .277" 2.260" 23.0 2431 40,600 PSI 25.3C 2651 52,000 PSI
    NEVER EXCEED MAXIMUM LOADS

    Good luck, couldn't find anything on Varget tho, you might be able to work something up relative to where Varget is on the powder burn rate chart using one of these as a reference. BE CAREFUL!!
    Here's a link to where this is: Cartridge Loads - Hodgdon Reloading Data Center - data.hodgdon.com
     

  3. bowhunthard

    bowhunthard Well-Known Member

    Messages:
    979
    Joined:
    Sep 5, 2008
    Don't try reading the above post, follow the link and enter your info. The post does not hold table data.