Need: 243 95 Berger Load Data

mike33,

I just started to work up a load for the 95 grain VLD's

The best load I've found to this point ( 1/2" ) at 100 is ...

46.1 grains H4350
Lapua brass
CCI large rilfe primers

80 thou. off the lands

Mike
 
No chronograph data yet. Best guess is between 2700 and 2800 ft/sec.

I want to try some re-17 to see if I can get the velocity up and keep the accuracy.


Mike
 
please keep me posted im going to try mine out sat. purchased a 243 take off barrel from a member here and just got in on. a buddy of mine headspaced it and of course had to run the reamer in to correct everything. i just mounted a nf on and hoping to work some loads. im going to try some 95 bergers and some 55 nosler bt.
mike
 
Less than 1/4" at 100 yards. I had to switch from Vit N560 to something because the Vit is impossible to find. I got tighter groups and more velocity with the 7828.
 
Okey, 43.0 grains H-414 Vel. 3015 1/2" group. 44 grains vel. 3100 but group was 1" 2 in 1 out, want to re try it. I loaded some more of both to re test but wind is pretty bad here. I tried IMR 4350 on sat. 2 in 1 out highest vel around 2950. Reloader 19 43 and 44 grains vel to slow around 2700-2800 i guess it was to slow of burning powder and not enough in it. I will keep posting after next time to range, hoping the wind will quit.
mike
 
hello, was just checking some data that was sent from berger 95 grain vld on h4350 38.5 min and 42.4 max with 92.7 fill ratio.loaded up some imr 4831 at 41 grains wheather turns let u know if the shoot.was just curiours if my data was right on h4350 as far as book starting data goes.thanks jeff
 
Warning! This thread is more than 15 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Recent Posts

Top