Manners Stock 7/300wsm

Discussion in 'Gun Photos' started by DCGS, Jul 2, 2012.

  1. DCGS

    DCGS <strong>Official LRH SPONSOR</strong>

    Messages:
    491
    Joined:
    Dec 5, 2007
    This was my first project with a Manners Stock. It is a very well built piece. Holding it empty I thought it may be a little heavy in the rear but when finished it balances very well. The specs on the build are:

    Manners MCS-Ta piller bedded
    Stiller Tac 300
    Jewel trigger
    Kwic Clip det mag
    Brux 15 palma chambered in 7-300 wsm finished at 26 inches, interuped fluting
    SSG slot port brake
    Stiller rail 20moa

    The scope and rings are mine just for test firing and pics. Hope you guys enjoy. Dan
     

    Attached Files:

  2. jett

    jett Well-Known Member

    Messages:
    245
    Joined:
    Feb 14, 2006
    Very nice! I know you felt right at home behind that lefty. How does it shoot?
     

  3. DCGS

    DCGS <strong>Official LRH SPONSOR</strong>

    Messages:
    491
    Joined:
    Dec 5, 2007
    Just shot it twice. Both bullets in one hole. Need to chrno it to see how much I lost going to the 26 in. barrel. Dan
     
  4. Rottenron

    Rottenron Well-Known Member

    Messages:
    85
    Joined:
    Dec 29, 2010
    DCGS What dose your rifle weigh.Same stock i want to use with a Tac 338 and a Brux Rem-Varmint barrel at 26"
     
  5. DCGS

    DCGS <strong>Official LRH SPONSOR</strong>

    Messages:
    491
    Joined:
    Dec 5, 2007
    I don't remember. I built it for a customer some time age. A good guess would be around 12 to 13 lbs. Dan
     
  6. Capt Academy

    Capt Academy Well-Known Member

    Messages:
    1,665
    Joined:
    Dec 31, 2006
    Very nice looking rifle!
     
  7. Rottenron

    Rottenron Well-Known Member

    Messages:
    85
    Joined:
    Dec 29, 2010
    Thanks a lot DCGS. Just needed an idea want to stay 12 and under.