Blancoalex
Well-Known Member
Like to hear anyone's tips and tricks on creating Long Range Subsonic loads. After some my research I would say greater than 100yds. Have been pretty successful out to 300yds with 22LR subsonic so a high BC bullet should extend this range. For me this will be for "fun" shooting for now! Below are some things I have found so far:
reload to bench rest standards
choice of powder used
neck tension
crimping
drilling larger primer flash hole to aid in reduced powder charge ignition
filler to hold powder close to primer
proper barrel twist for the bullet used
proper rifle handling because of SLOW bullet time in barrel
Thanks
reload to bench rest standards
choice of powder used
neck tension
crimping
drilling larger primer flash hole to aid in reduced powder charge ignition
filler to hold powder close to primer
proper barrel twist for the bullet used
proper rifle handling because of SLOW bullet time in barrel
Thanks