Loads for 7mm Ultra and 160 Accubonds

Discussion in 'Reloading' started by Idaho_Elk_Huntr, Jan 1, 2006.

  1. Idaho_Elk_Huntr

    Idaho_Elk_Huntr Well-Known Member

    Messages:
    256
    Joined:
    Dec 24, 2005
    Anyone have any loads using 160 grain Accubonds and Reloder 25 and IMR 7828?
    Also any load info for the same powder and Barnes TSX 150's?
    Thanks!!
     
  2. 7Rumloader

    7Rumloader Well-Known Member

    Messages:
    540
    Joined:
    Jan 20, 2005
    I can't help you with those powders but if you get some H-1000 or H-50 BMG I have data for those powders I will share with you.
     

  3. mikael

    mikael Active Member

    Messages:
    40
    Joined:
    Jun 15, 2005
    [ QUOTE ]
    I can't help you with those powders but if you get some H-1000 or H-50 BMG I have data for those powders I will share with you.

    [/ QUOTE ]i have h-1000 and ned some load four that in 7mm ultra can you share with you
    mikael
    sweden
     
  4. Idaho_Elk_Huntr

    Idaho_Elk_Huntr Well-Known Member

    Messages:
    256
    Joined:
    Dec 24, 2005
    [ QUOTE ]
    I can't help you with those powders but if you get some H-1000 or H-50 BMG I have data for those powders I will share with you.

    [/ QUOTE ]

    Thanks! I have the 50 BMG powder also.
     
  5. firstcoueswas80

    firstcoueswas80 Well-Known Member

    Messages:
    336
    Joined:
    Jan 4, 2006
    i have experience with 140 accubonds and h4831sc that shot real well out of my dads ultra mag.
     
  6. budlight

    budlight Well-Known Member

    Messages:
    836
    Joined:
    Sep 30, 2004
  7. 7Rumloader

    7Rumloader Well-Known Member

    Messages:
    540
    Joined:
    Jan 20, 2005
    Here is a thread with some data I posted a while back with some of my favorite loads. link
     
  8. 7Rumloader

    7Rumloader Well-Known Member

    Messages:
    540
    Joined:
    Jan 20, 2005
    I just noticed that the 50-BMG powder loads were not in that list for the 160 Accubonds but here goes.
    Work it up to 103.5 grains ( max in my stick ) and see how they shoot.

    Hope that helps both of you!!
     
  9. Idaho_Elk_Huntr

    Idaho_Elk_Huntr Well-Known Member

    Messages:
    256
    Joined:
    Dec 24, 2005
    [ QUOTE ]
    Hope that helps both of you!!

    [/ QUOTE ]

    Thansk for the help!!
    Barnes emailed me a couple of pages of data today for the Big 7! Now I can get started on loading!
    Thanks again!!!
     
  10. cheetah

    cheetah New Member

    Messages:
    1
    Joined:
    Jan 7, 2006
    I am looking for reloading information for my 7mm Ultra Mag
    for a 140 grain bullet using Reloader 25
     
  11. Idaho_Elk_Huntr

    Idaho_Elk_Huntr Well-Known Member

    Messages:
    256
    Joined:
    Dec 24, 2005
    [ QUOTE ]
    I am looking for reloading information for my 7mm Ultra Mag
    for a 140 grain bullet using Reloader 25

    [/ QUOTE ]

    What bullet are you using? I have a book full of data for 140 grain bullets.
     
  12. 7Rumloader

    7Rumloader Well-Known Member

    Messages:
    540
    Joined:
    Jan 20, 2005
    Cheetah the best results I had with RL25 was with 140 grain BT's. I worked up to 96 grains with Rem 9 1/2 M primers and got good groups and decent velocity spreads.
    The 140 Accubond was a different story. It wanted nothing to do with RL25.