Load Data For The Hornady 208 Grn A-Max In My 300RUM

trapper300RUM

Member
Joined
Mar 28, 2013
Messages
13
Location
Saltville VA
I have been looking for loaddata for this bullet & i hope that one of you fellas may have some data for the Hornady if so let me know thanks I am using Hodgdon's RETUMBO powder Remington Brass & Federal 215 LRM Primers
 
That is my prefered set-up. I would start with 90g and see where your at. I shoot 92g out of a 27" Shilen select match doing 3050. With that I am just getting into transonic at 1730yds....At least that is what Atrag tells me...gun):cool:
 
I am loading 86.5 grains of RETUMBO i haven't had a chance to shhot these loads& see where i am at .I was shooting 92.3 grains of the RETUMBO & Don @ www.loaddata.com sent me this load for the Hornady 208 Grain to tryout & when i can find the time ill shoot some of them & ill post my results on the forum gun)
 
Warning! This thread is more than 12 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Recent Posts

Top