S Sendero_Man Well-Known Member Joined Feb 4, 2007 Messages 1,707 Location Buffalo, Wyoming Nov 1, 2008 #1 working on new load for 243 AI Win brass 2.825 OAL 115 DTAC moly and 111 DTAC BN Fed 210 Hodgdon Hybrid powder
working on new load for 243 AI Win brass 2.825 OAL 115 DTAC moly and 111 DTAC BN Fed 210 Hodgdon Hybrid powder
S Sendero_Man Well-Known Member Joined Feb 4, 2007 Messages 1,707 Location Buffalo, Wyoming Nov 2, 2008 #2 Rifle specs are... 243 Ackley Improved..... Stiller TAC30 action Mcmillan A5 stock ABS wrapped Rock Creek liner 7.75 twist finish at 26" Timney trigger set at 2 lbs. Badger DM with 2 mags. Badger heavy recoil lug Stiller 20 MOA pic. rail NF .885 Ultra light rings NF 3.5-15x56 with 2 DD reticle
Rifle specs are... 243 Ackley Improved..... Stiller TAC30 action Mcmillan A5 stock ABS wrapped Rock Creek liner 7.75 twist finish at 26" Timney trigger set at 2 lbs. Badger DM with 2 mags. Badger heavy recoil lug Stiller 20 MOA pic. rail NF .885 Ultra light rings NF 3.5-15x56 with 2 DD reticle
F Forester Well-Known Member Joined Mar 23, 2008 Messages 436 Location Chatham, VA Nov 4, 2008 #3 What did the groups look like? I have been thinking about a 243AI sometime... Edited to add: especially those two 45.5gr loads.
What did the groups look like? I have been thinking about a 243AI sometime... Edited to add: especially those two 45.5gr loads.
L lou400a Well-Known Member Joined Mar 20, 2008 Messages 529 Location SE Florida Nov 12, 2008 #4 Anyone tried this powder in 260 yet?
Iron Worker Well-Known Member LRH Supporter Joined Apr 3, 2004 Messages 2,601 Location Reno Nevada Nov 14, 2008 #5 Has any one tried this powder in 6x284 ?
RockyMtnMT Official LRH Sponsor Joined Mar 25, 2007 Messages 7,964 Location Montana Nov 15, 2008 #6 I am using it in a 6.5-06. 49g under 130 Scirocco @ 2950fps. Very mild, shoots very well. Steve
Ernie SPONSOR Joined Jun 18, 2007 Messages 4,152 Location NE Wyoming Nov 15, 2008 #7 Scott, I have been thinking about that same powder for my 6mm-6.5x47 Lapua and in my 6.5-284. Thanks for the post.
Scott, I have been thinking about that same powder for my 6mm-6.5x47 Lapua and in my 6.5-284. Thanks for the post.