buckbrush
Well-Known Member
I apologize if this has been covered before. I tried a search and nothing came up.
I am getting run out on my 7mm Rem mag and I don't know why or how to eliminate it. My gun definitely likes loads with less runout. I seperated some rounds into "non-noticeable visible runout" and "noticeable visible runout" using a hokey set of v-blocks I made because I don't have a gauge.
Groups with the noticeable were 0.450" and without were 0.280" I confirmed this with three trials.
I am using an RCBS rock chuck press with Remington Brass and a Lee Collet Die set.
Where do I go from here to eliminate it?
Thanks for any help.
I am getting run out on my 7mm Rem mag and I don't know why or how to eliminate it. My gun definitely likes loads with less runout. I seperated some rounds into "non-noticeable visible runout" and "noticeable visible runout" using a hokey set of v-blocks I made because I don't have a gauge.
Groups with the noticeable were 0.450" and without were 0.280" I confirmed this with three trials.
I am using an RCBS rock chuck press with Remington Brass and a Lee Collet Die set.
Where do I go from here to eliminate it?
Thanks for any help.