getting the most out of my factory Remington 700

pfraze

New Member
Joined
Jul 3, 2010
Messages
1
I have a remington 700 7mm rem mag. Its the cheaper version with the synthetic stock. I was wondering what I could do to it to further its accuracy? It shoots pretty good, and I killed a mule deer at 400+ yards year before last. I'm curious what I can do it with out breaking the bank. Thanks!
 
If it is the factory Tupperware stock I'd say replace it. Get a good stock and a bed it. Then handload and fine tune to your rifle. Also a trigger job or replace the trigger.
 
+1 CAHunter

1) Get a stiffer stock. I have a lightweight carbon fiber stock from Brown Precision, Very stiff, VERY light and I swear it 'absorbs' recoil.

2) I use a Timney trigger on mine (was around $100) when I switched it (now they're around $130), set for just under 2lbs.

Bed the stock with DevCon.

One other thing, use a good base/rings and a quality scope.

I use Seekins Aluminum Rail, Low Rings and a Leupy 4.5x14x40.

It weighs 8lbs all up and will hold 1/2MOA out to 800 yards with 160gr Accubonds.

AJ
 
I have a remington 700 7mm rem mag. Its the cheaper version with the synthetic stock. I was wondering what I could do to it to further its accuracy? It shoots pretty good, and I killed a mule deer at 400+ yards year before last. I'm curious what I can do it with out breaking the bank. Thanks!

If you don't want to break the bank, buy yourself a laminate stock (easily under $100) then pillar and epoxy bed it. Have the trigger adjusted for a light crisp let-off (by a gunsmith if you're not sure). That alone will give you more consistant accuracy.
Also, unless you handload already, look into it as it'll increase accuracy and save you money long term - two things you are looking for. Some of the Lee Precision reloading kits are very well priced, while there are better, you can pay 3x more and not see a difference in accuracy. This will allow you to practice with your rifle more as it won't cost so much, making YOU a better shot, not just your rifle.

Those are my recommendations

Phil
 
Warning! This thread is more than 13 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Recent Posts

Top