First post.

[PatrickC]

Welcome from sw PA

Thank you for the welcome.

 

[PatrickC]

Bergara Ridgeback 300 PRC.

 

[haisardao]

Nice looking gun, I've had a few Bergara rifles and they all have been outstanding shooters. You'll have a blast with that one. Keep us posted, thinking on getting a PRC.

 

[PatrickC]

Nice looking gun, I've had a few Bergara rifles and they all have been outstanding shooters. You'll have a blast with that one. Keep us posted, thinking on getting a PRC.

Thank you for your reply.

Now I'm trying to figure out which muzzle brake to go with??

 

[haisardao]

I love the area 419 one

Hellfire Self Timing Muzzle Brake

The HELLFIRE Self Timing Brake system was engineered from the ground up to reduce more recoil and muzzle flip, while being easier to install.

www.area419.com

And

5 Port Self Timing Muscle Brake

[email protected]

www.piercisionrifles.com

They are awesome

 

[PatrickC]

I love the area 419 one

Hellfire Self Timing Muzzle Brake

The HELLFIRE Self Timing Brake system was engineered from the ground up to reduce more recoil and muzzle flip, while being easier to install.

www.area419.com

And

5 Port Self Timing Muscle Brake

[email protected]

www.piercisionrifles.com

They are awesome

I've been looking at the Hellfire.

I will check out piercision rifles 5-port.

Any thoughts on Ultradyne Apollo Max muzzle brake?

 

[haisardao]

I've been looking at the Hellfire.

I will check out piercision rifles 5-port.

Any thoughts on Ultradyne Apollo Max muzzle brake?

I have not use it. Pretty sure someone here hs experience with them.

 

[PatrickC]

I have not use it. Pretty sure someone here hs experience with them.

I have not use it. Pretty sure someone here hs experience with them.

The Hellfire Match 4 port has my attention.

 

[JUSTSENDIT!]

New rifle in 300 PRC.

I just bought a Bergara Ridgeback in 300 PRC. Putting a Vortex Razor Gen III 6-36x56mm. Wanting to set it up for 1000+ yard shooting.

Any advice on mounting the scope?

Been reloading for decades and was wanting to know what bullets and powders I should focus on?

Welcome, I have an ERA Tac on mine set at 30, on top of a 20 moa rail, so I get full travel out of my scope. I also use 225 ELDM and H1000.

 

[PatrickC]

Welcome, I have an ERA Tac on mine set at 30, on top of a 20 moa rail, so I get full travel out of my scope. I also use 225 ELDM and H1000.

Thank you for the welcome.

I was looking at a NIGHTFORCE A135 X-Treme Duty 1-Piece for HS 700 Long Action Guns 20 MOA with 8-40 Screws Steel Base.

Will that be enough to shoot 1 mile?

My shope will have 120 total moa. 60 up / 60 down.

 

[JUSTSENDIT!]

Thank you for the welcome.

I was looking at a NIGHTFORCE A135 X-Treme Duty 1-Piece for HS 700 Long Action Guns 20 MOA with 8-40 Screws Steel Base.

Will that be enough to shoot 1 mile?

My shope will have 120 total moa. 60 up / 60 down.

1 mile it depend's what bullet I'm using, 225g ELDM says I need 21.1 Mils (73.8 moa )of elevation, a 230G ATip 18.6 Mils. (65 moa)To convert mils to Moa multiply by 3.5 or divide by 3.5 find Moa. Hope this helps.

 

[Im4u2nvrc]

I have a 300PRC in Christensen Arms MPR with a NF NX8 4-32x50 F1. I have 110MOA on this setup, plenty of angle to reach out to a mile, and someday, I hope to reach out a little further.

 

[Eric H]

I used this at 1 mile+. Never used my scope elevation. Now that I've marked that off the bucket list I'll let it go. https://heritage-arms.com/product/m-r-a-b-144-mil-radian-adjustment-gen-4/

 

[PatrickC]

I have a 300PRC in Christensen Arms MPR with a NF NX8 4-32x50 F1. I have 110MOA on this setup, plenty of angle to reach out to a mile, and someday, I hope to reach out a little further.

Then I'm guessing I might need a little more than 20MOA.

Just how far down the wormhole "distance" do I want to go??

Would like to still be able to hunt with it.

Maybe I might be wanting to much from one setup?