Do you clean your brass?

[Lee7588]

I was just watching an interview with a long range shooter and he claimed that he doesn't clean his brass. Most of the time I clean mine because I was told I had to. Do all of you clean your brass before you reload it?

 

[2buffalo]

No. I would rather spend time on the things that make a difference with accuracy.

 

[memtb]

Once in a "Blue Moon"……but only when it looks really bad! I mean…..really bad! memtb

 

[can1010]

just long enough to get whatever sizing lubricant you use off. 30-40min in dry tumbler

 

[Mark37082]

I just de-prime and toss them in a vibrating walnut media for a couple of hours. I like shiny brass. The only issue I've run into is picking out media from the primer pockets. No big deal for me.

 

[K.E.C.]

NO. But I trim when needed, clean and uniform primer pockets and take a nylon brush to the inside neck with a small cordless drill. When the brass is tarnished
Or oily from sizing I will throw them in a tumbler.

 

[Lee7588]

The video put out by Backfire TV on YouTube and it was Erik Cortina. Interesting video if no one has checked it out it is worth the time

 

[nksmfamjp]

I clean mine twice per cycle. Once before sizing and once after sizing.

 

[Lee7588]

just long enough to get whatever sizing lubricant you use off. 30-40min in dry tumbler

I'm thinking that I will be adopting your method. Just enough to get rid of the lube

 

[nksmfamjp]

I'm thinking that I will be adopting your method. Just enough to get rid of the lube

You really just need to knock the dust off and then the lube off. This is quick in a dry tumbler.

 

[can1010]

I'm thinking that I will be adopting your method. Just enough to get rid of the lube

that works for me, I deprime, anneal, size and trim then toss them into the tumbler. doing hundreds of small cases is rough on my hands when try to use a rag.

 

[Lee7588]

My main thing is to get the lube off. Most of the time I put shells in the tumbler I forget about them for a day or two before to turn it off

 

[Ol' Red]

I dry tumble before sizing. I have scratched the inside of sizing dies in the past from dirty brass. It left some bad scratches on my brass. I sent the dies back to the manufacture to have them polished or replaced.

 

[Axl]

Vibratory w/ walnut for real dirty stuff. But otherwise i use a microfiber cloth to wipe the lube of after sizing.